Contact 812-425-1336

Dodge® 077787 DOD077787
  1. pin-int

Dodge® 077787 DOD077787

Dodge® P2B-SCED-107 MOD (077787) 207 Extreme Duty Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6-1/2 in OAL x 3-3/4 in OAH

  • Manufacturer: Dodge Industrial
  • Brand Name: Dodge®
  • Part Number: DOD077787
  • Alt Part Number: P2B-SCED-107 MOD
  • MPN: 077787
  • UPC: 782475263820
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading
  • Sign In for Pricing and Availability

Dodge® P2B-SCED-107 MOD (077787) is a Series 207 extreme duty pillow block ball bearing unit with a 1-7/16 in round bore. It uses two-bolt base mounting, 65 deg set screw locking, a triple lip seal, and a non-expansion (fixed) design. Load capacity is 5759 lb Dynamic/3461 lb Static.

Dodge® P2B-SCED-107 MOD (077787) Pillow Block Ball Bearing Unit, Extreme Duty, Series: 207, 1-7/16 in Bore, 4.68 to 5.44 in Bolt Center-to-Center Length, 1.88 in Base to Bore Centerline, 6-1/2 in Overall Length, 1.71 in Overall Width, 3-3/4 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1-3/4 in Base Width, 65 deg Set Screw Locking Device, Triple Lip Seal, Non-Expansion (Fixed) Expansion, 5759 lb Dynamic/3461 lb Static Load, 4500 rpm Maximum, Cast Iron, Powder Coated

Base Width      :      1-3/4 in
Base to Bore Centerline      :      1.88 in
Bolt Center-to-Center Length      :      4.68 to 5.44 in
Bore Diameter      :      1-7/16 in
Bore Type      :      Round
Expansion Type      :      Non-Expansion (Fixed)
Finish      :      Powder Coated
Load Capacity      :      5759 lb Dynamic/3461 lb Static
Locking Device      :      65 deg Set Screw
Material      :      Cast Iron
Maximum Speed      :      4500 rpm
Mounting Type      :      Two-Bolt Base
Overall Height      :      3-3/4 in
Overall Length      :      6-1/2 in
Overall Width      :      1.71 in
Seal Type      :      Triple Lip
Series      :      207
Type      :      Extreme Duty
  • DualGuard™ seal with rubberized flinger is standard
  • Precision hardened and honed setscrew mounted ball bearings in globally interchangeable
  • Unique 65 deg setscrew angle and premium cup point setscrews optimize shaft holding power without excessive inner ring distortion
  • Wide inner ring design
  • pdfInstruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/ABB_049735_Manual.pdf
  • pdfCatalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/ABB_049751_Catalog.pdf
  • pdfSpecification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/ABB_050816_Specification_Sheet.pdf