Dodge® 023182 DOD023182

Dodge® Type E-Xtra, K, DI, TAF and EXL double row tapered roller bearings have the capacity to carry heavy radial loads and combined radial and thrust loads. The maximum recommended load which can be applied is limited by various components in the system such as bearing, housing, shaft, shaft attachment, speed and life requirements as listed in this catalog. Dodge® tapered roller bearings have been applied successfully even when these limits have been exceeded under controlled operating conditions.

Dodge® Pillow Block Roller Bearing Unit, Type K, Series: 211, 2-3/4 in Bore, 9.88 to 11.5 in Bolt Center-to-Center Length, 3-3/4 in Base to Bore Centerline, 13.44 in Overall Length, 3.78 in Overall Width, 7.92 in Overall Height, Two-Bolt Base Mounting, Tapered Bore, 2.94 in Base Width, 65 deg Set Screw Locking Device, Triple Lip Seal, Non-Expansion (Fixed) Expansion, 11120 lb Dynamic/61200 lb Static Load, 2060 rpm Maximum, Cast Iron, Black Oxide

• Item Features 01=Factory assembled, adjusted and pre-lubricated
• Item Features 02=Case hardened rollers and races
• Item Features 03=Easy installation and maintenance
• Item Features 04=Single rubber lip contacting seals

• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dodge_023329_Instruction_Sheet.pdf