Browning® 732668 BROVF2S40MM

Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.

Browning® Ball Bearing Unit, Non-Expansion Normal Duty, Series: VF2S 200, 40 mm Bore, 143.5 mm Bolt Center-to-Center Length, 2-Bolt Flange Mounting, 171.5 mm Overall Length/Diameter, 51.2 mm Overall Depth, 104.8 mm Overall Height, Set Screw Locking Device, Steel Bearing, Nitrile Rubber Seal, 32650 N Dynamic/19870 N Static Load, 3500 rpm Maximum, 121 deg C

• A positive-contact molded nitrile rubber contact seal with an auxiliary flinger element comes standard
• An anti-rotation rivet prevents outer ring creep or rotation within the housing
• Semi solid cast iron base
• Setscrew locking is 120 deg spaced, balanced three-point contact minimizes inner ring distortion vibration while reducing noise and improving reliability
• Nylon retainer
• 52100 bearing insert
• NLGI 2 lithium complex grease lubrication
• Powder coat epoxy cast iron housing
• Powder coat epoxy cast iron housing_x005f Zone hardened inner ring with 120 deg spacing setscrew lock with diamond faceted setscrews_x005f Single lip contact seal and flinger

• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_A175382_Warranty.pdf
• Instruction/Installation Manual https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_VF2S20MM_Manual.pdf
• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_VF2S20MM_Specification_Sheet.pdf