Browning® 1297548 BROAAHQ

When a particular phase relationship is required between two parts of a machine, the angle adjusting hub provides quick, accurate and positive phase adjustment. Without the angle adjusting hub, phase relationship of parts requires extremely accurate machining of components as one tooth of a sprocket or gear is usually too coarse an adjustment.

Browning® Synchro-Angle Adjusting Hub, 3/4 to 2-1/16 in Bore, 6-1/4 in OD, 5-5/8 in Pilot Diameter, 4-3/8 in Diameter Bolt Circle, 3 Bolt Holes, 3-9/32 in Overall Length

• Adjusts quickly and easily
• Infinite adjustment can be made throughout the 24 deg range of the hub
• Once adjusted, the hub should not slip out of adjustment
• When both are tightened, the adjusting screws act against each other like jam nuts
• Eliminate extended deliveries on "keyway on centerline" items
• For quick, accurate phase adjustment of chain drives, gear drives, cams and timing or synchronizing applications
• Q1 type bushing
• 1/2-13 NC drilled and tapped holes
• Angle adjusting hubs are machined for Browning Split Taper bushings
• When a particular phase relationship is required between two parts of a machine, the Angle Adjusting Hub provides quick, accurate and positive phase adjustment
• Solid Flange and Double Split Barrel - Assures better concentricity to the shaft
• Key to Key Drive - With keys on both the shaft and product to provide the strongest possible drive
• 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_1297548_Catalog.pdf