Browning® 1057413 BRO72HQ200

Browning® Gearbelt® Synchronous Timing Pulley, Type 14, Split Taper Bore, 3/4 to 2-11/16 in Bore, 11.405 in OD, 11.459 in Pitch Diameter, 72 Grooves, 1/2 in Pitch, 2.281 in Face Width, 4-1/8 in Diameter Hub, 0.484 in Hub Projection, Q1 Bushing, 3-1/16 in Overall Length, For Use With: 2 in W Type H200 Belt

• Light weight high horsepower to weight ratio makes Browning® Gearbelt® drives ideal for any application where weight is a factor
• Broad depth of product to choose from Browning® offers 5 different sprocket pitches along with a wide range of sprocket and belt widths to accommodate any horsepower requirement
• High modulus strength member, needs minimum take-up
• Freedom from initial belt tension, reduces bearing loads, increases life
• Compact design Gearbelt® belts permit smaller pulleys, shorter centers and narrow belts
• Less heat, because Gearbelt® drives generate virtually no friction
• No lubrication required
• Wide load capacity range
• Constant Speed - No slip, no creep, minimum backlash due to the positive engagement of the belt teeth with the grooves of the sprockets
• Different Mounting to the shaft - Browning offers the Gearbelt Pulleys in various ways to mount to the shaft, Split Taper and QD Bushing styles, as well as, finished and minimum plain bore
• Molded Teeth - Shear resistance teeth designed to provide smooth positive engagement with gearbelt pulleys
• High Tensile Cord - Specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt
• Compression Section - Bonds to belt cords for protections against dirt, grease, oil, ozone, and other environmental hazards

• Warranty Information https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_A175382_Warranty.pdf