An O-Ring functions as a seal through the mechanical deformation of the elastomeric compound by mating metal surfaces. The resilient rubber conforms to the shape of the metal sections and blocks the passage of gases or liquids. If the pressure increases, the O-Ring is further deformed and provides tighter sealing.
APG, VB90261, O-Ring, Grade A, Series: VB90, 6.75 in ID, 7 in OD, 1/8 in Cross Section, Round Cross Section, 261 Dash Number, 90 Durometer, Hard Hardness, -15 to 400 deg F, Fluoroelastomer, Brown, Import
| Color | : | Brown |
| Cross Section Shape | : | Round |
| Cross Section | : | 1/8 in |
| Dash Number | : | 261 |
| Domestic/Import | : | Import |
| Durometer | : | 90 |
| Hardness | : | Hard |
| Inside Diameter | : | 6.75 in |
| Material | : | Fluoroelastomer |
| Outside Diameter | : | 7 in |
| Series | : | VB90 |
| Temperature Rating | : | -15 to 400 deg F |
| Type | : | Grade A |
- Excellent mechanical and physical properties
- Good resistance to petroleum products, low compression set and high temperature resistance
- Wide spectrum of chemical compatibility
- Good for vacuum service and low gas permeability
Catalog