An O-Ring functions as a seal through the mechanical deformation of the elastomeric compound by mating metal surfaces. The resilient rubber conforms to the shape of the metal sections and blocks the passage of gases or liquids. If the pressure increases, the O-Ring is further deformed and provides tighter sealing.
APG, H70255, O-Ring, Series: H70, 5.625 in ID, 5.875 in OD, 0.125 in Cross Section, Round Cross Section, 255 Dash Number, 70 Durometer, Standard Hardness, -40 to 250 deg F, Nitrile, Black, Import
| Color | : | Black |
| Cross Section Shape | : | Round |
| Cross Section | : | 0.125 in |
| Dash Number | : | 255 |
| Domestic/Import | : | Import |
| Durometer | : | 70 |
| Hardness | : | Standard |
| Inside Diameter | : | 5.625 in |
| Material | : | Nitrile |
| Outside Diameter | : | 5.875 in |
| Series | : | H70 |
| Temperature Rating | : | -40 to 250 deg F |
- The most widely used O-ring elastomer
- Excellent resistance to petroleum products
- Excellent compression set, tear and abrasion resistance
- Does not have good resistance to ozone, sunlight or weather, unless specifically compounded
- Should not be stored in direct sunlight or near motors or other electrical equipment which may generate ozone
Catalog